SCRIBE ÉLAN WHEELSET

42-D

1,375g

WEIGHT

21mm

INT. RIM WIDTH

TUBELESS

READY

SINGLE-DISC

RATCHET

CERAMIC BEARINGS, CARBON SPOKES, LIGHTNING FAST 6.6° ENGAGEMENT.

SCRIBE ÉLAN WHEELSET

42-D

1,375g

WEIGHT

21mm

INT. RIM WIDTH

TUBELESS

READY

SINGLE-DISC

RATCHET

CLIMB FAST. GLIDE AT SPEED. CORNER WITH CONFIDENCE.

CERAMIC BEARINGS, CARBON SPOKES, LIGHTNING FAST 6.6° ENGAGEMENT.

Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)
Élan 42-D Carbon Spoke Wheelset (1,375g)

Élan 42-D Carbon Spoke Wheelset (1,375g)

Regular priceCHF 1,347.00
/

Pre-Order Option
Bearings
Engagement
  • Please note: We are experiencing incredibly high demand for our wheels and we have now SOLD THROUGH this batch. We're expecting more SEPTEMBER WEEK 4.

  • To get your hands on a set from the next batch, you can Pre-Order by Buying in Full, or with a 10% deposit.

RATED BY PROFESSIONALS

WHEELS FOR PURPOSE

Hand-built, quality control checked & dispatched in-house. The Élan 42-Ds were designed to offer the pinnacle in performance. Utilising high strength, super lightweight carbon spokes (2.6g each), our engineers have been able to create a wheelset that is incredibly lightweight, and incredibly responsive.

Due to the unique spoke design, our carbon spokes have significantly higher strength-to-weight ratio when compared to stainless steel spokes. The increased strength allows us to build more tension into the wheels for improved performance. Due to mechanical properties of carbon spokes, road buzz is also reduced.

Weighing only 1,375g the Élan 42-Ds are exceptionally lightweight and pound-for-pound feature amongst the best wheels out there. Offering an unparalleled level of performance when compared to rivals. These wheels are the go-top-option for those looking for speed; they are deep enough to give you that boost when pressing hard on the flats, light enough that they won't hold you back on the hills and wide enough to allow you to corner hard, but with confidence!

The Wide 21mm internal profile lets you fit wide tyres for increased stability when cornering, and increased speed due to improved rolling resistance - especially when ran as tubeless. With a centrelock disc as standard, you can ride with confidence knowing the stopping power is there when needed.

RIMS

Toroidal Disc, specific design for improved Aerodynamics. Wide 21mm internal & 30mm external profile.

Tubeless ready design, gives you the option to have increased puncture resistance, faster-rolling wheels and improved weight.

High Filament (12k / 18k) Japanese Toray T700/T800 carbon fibre. Unidirectional for strength with additional reinforcement at spoke holes.

Optimised TG (Glass Transition) resin used to produce a super lightweight, responsive, low void carbon for increased performance.

HUBS

Double Disc Ratchet Drive Hub System exclusive to Scribe.
 
Available in all major standards: Shimano (HG & HG+) // SRAM (PG) 8,9,10,11,12 speed compatible Anti-bite freehub body / Campagnolo / XDR
 
Ratchet Disc, Unique leaf & coil spring system offers incredible durability as there's few moving parts.
 
Straight-Pull Hub design.
 
4-D precision drilled spoke holes, fully CNC'd rounded design.

SPOKES & NIPPLES

High Strength, super lightweight UD carbon spokes (2.6g each)

Straight-pull for increased torsional strength.

21 Hole Front / 24 Hole Rear

For nipples, we use Pillar Patented TG Lock Square head so the nipples are locked into place.

BEARINGS

Ceramic Bearings: Featuring delicately manufactured Grade 3 Silicon Nitride Ceramic Balls, their unique design means extremely lower amounts of friction & a potential to save up to 9 watts of energy when riding! It's free performance!
 
Ceramic Bearings Required:
Front = 6802 (x2)
Rear = 6802 (x1) & 6902 (x1)
Freehub = 6802 (x2)
 
High Quality TPI stainless steel bearings which doesn't rust or corrode.
 
Aqua Grease: Repels water and allows your bearings to spin smoothly in the long term.

RATED BY PROFESSIONALS

WHEELS FOR PURPOSE

Hand-built, quality control checked & dispatched in-house. The Élan 42-Ds were designed to offer the pinnacle in performance. Utilising high strength, super lightweight carbon spokes (2.6g each), our engineers have been able to create a wheelset that is incredibly lightweight, and incredibly responsive.

Due to the unique spoke design, our carbon spokes have significantly higher strength-to-weight ratio when compared to stainless steel spokes. The increased strength allows us to build more tension into the wheels for improved performance. Due to mechanical properties of carbon spokes, road buzz is also reduced.

Weighing only 1,375g the Élan 42-Ds are exceptionally lightweight and pound-for-pound feature amongst the best wheels out there. Offering an unparalleled level of performance when compared to rivals. These wheels are the go-top-option for those looking for speed; they are deep enough to give you that boost when pressing hard on the flats, light enough that they won't hold you back on the hills and wide enough to allow you to corner hard, but with confidence!

The Wide 21mm internal profile lets you fit wide tyres for increased stability when cornering, and increased speed due to improved rolling resistance - especially when ran as tubeless. With a centrelock disc as standard, you can ride with confidence knowing the stopping power is there when needed.

RIM

Toroidal Disc, specific design for improved Aerodynamics. Wide 21mm internal & 30mm external profile.

Tubeless ready design, gives you the option to have increased puncture resistance, faster-rolling wheels and improved weight.

High Filament (12k / 18k) Japanese Toray T700/T800 carbon fibre. Unidirectional for strength with additional reinforcement at spoke holes.

Optimised TG (Glass Transition) resin used to produce a super lightweight, responsive, low void carbon for increased performance.

HUBS

Double Disc Ratchet Drive Hub System exclusive to Scribe.
 
Available in all major standards: Shimano (HG & HG+) // SRAM (PG) 8,9,10,11,12 speed compatible Anti-bite freehub body / Campagnolo / XDR
 
Ratchet Disc, Unique leaf & coil spring system offers incredible durability as there's few moving parts.
 
Straight-Pull Hub design.
 
4-D precision drilled spoke holes, fully CNC'd rounded design.

SPOKES & NIPPLES

High Strength, super lightweight UD carbon spokes (2.6g each)

Straight-pull for increased torsional strength.

21 Hole Front / 24 Hole Rear

For nipples, we use Pillar Patented TG Lock Square head so the nipples are locked into place.

BEARINGS

Ceramic Bearings: Featuring delicately manufactured Grade 3 Silicon Nitride Ceramic Balls, their unique design means extremely lower amounts of friction & a potential to save up to 9 watts of energy when riding! It's free performance!
 
Ceramic Bearings Required:
Front = 6802 (x2)
Rear = 6802 (x1) & 6902 (x1)
Freehub = 6802 (x2)
 
High Quality TPI stainless steel bearings which doesn't rust or corrode.
 
Aqua Grease: Repels water and allows your bearings to spin smoothly in the long term.
 

ADDITIONAL ITEMS IN THE BOX

  • Tubeless tape: pre-installed
  • Tubeless Valves

Weight Limit: The upper combined weight limit is 125kg.


Recently viewed